Connecting USB Devices With a USB OTG Cable

Mevo customers who do not own a Mevo Boost but wish to bring in USB devices to their Mevo can do so with the addition of a USB On The Go (OTG) cable, such as this one.

An OTG cable has a USB-A input, a microUSB input, and a microUSB output.

Plug the microUSB output into the back of the Mevo (instead of the Mevo charging cable).

Plug the Mevo charging cable into the OTG cable's microUSB input, then plug it into a power outlet. This will charge the Mevo.

Now you can add other USB devices to your Mevo workflow, such as a USB audio device.

You can also use an Ethernet-to-USB adapter to bring in an Ethernet connection.

If you are connecting to Ethernet via this USB workaround, please be advised that you must connect your iOS device to Mevo using the Mevo's Hotspot.

The Mevo app will indicate the camera is connected to an 4G/LTE Modem, however this is simply due to the software recognizing the hardware as a USB connection. Be assured that you are in fact streaming over Ethernet, not data.